Controller Configuration
Prominent Controller
Configure the Network Settings of the controller using the following settings:
192.168.50.5 IP Address (Controller 1)
255.255.255.0 - Subnet Mask (all controllers)
192.168.50.1 - Default Gateway (all controllers)
Attach the supplied external antennas (Wi-Fi on top / cellular on sides) and provide power to the router.
Connect one end of the supplied Ethernet cable to the end of the controller and the other end to the first open port after power cord at the bottom of the router.
Scan the QR code or launch your browser and enter the supplied secure web addresses. Both are included on the installation guide that you will have received with the new modem. The controller login screen should appear.
If these steps were followed and the controller login screen is not displaying, please contact us at 888-455-6641 or email us at modems@aquaphoenixsci.com.