Ethernet Configuration
On the front panel of the controller, press the MENU button.
Using the up and down arrows on the front panel, scroll through the menu until you find the System settings.
In the System settings, find the option labeled Communications, then change the following parameters in that menu:
LAN IP Address: 192.168.50.5
LAN Gateway: 192.168.50.1
LAN Netmask: 255.255.255.0
DHCP: No
LAN HTTP Port: 80
When the parameters have been changed, reboot the controller.
Wi-Fi Configuration
Wi-Fi can only be used to directly access the controller interface. It cannot be used to connect the controller to the internet. Ethernet must be used if controller needs internet access.
On the front panel of the controller, press the MENU button.
Using the up and down arrows on the front panel, scroll through the menu until you find the System settings.
In the System settings, find the option labeled Communications, then change the following parameters in that menu:
WiFi Direct: Always On
DHCP: No
LAN HTTP Port: 80
Please note: the Wi-Fi IP address and Wi-Fi Netmask of the controller are static and cannot be changed
When the parameters have been changed, reboot the controller.