Open Flight RMS and navigate to your device.
Click Device Details.
Go to the Remote Access tab.
Select Add Remote Access.
Click Scan Device.
From the list, select the IP address of your controller and choose the appropriate port and protocol.
For webpage access, select port 80 (HTTP).
If your device does not appear in the Auto scan—and you’ve confirmed it’s on the correct network—you can add it manually:
In the Add Remote Access window, open the Manual tab.
Enter a name, the controller’s IP address, the port, and the protocol.
Click Add.
Select your newly created Remote Access entry.
Under Generated Links, choose a link duration and click Generate to create the web link.
If the generated link does not work, verify that the controller is reachable and that its network settings are correct.
How to Generate a Controller Link in Flight RMS
These instructions explain how to set up remote access to a controller in Flight RMS
Updated over a month ago