Skip to main content
All CollectionsInstallation Guides
GWBR1 SIM Installation with Photos
GWBR1 SIM Installation with Photos

How to add a SIM card to the GWBR1 modem.

Updated this week

  • ​
    ​You will need:
    -Small screwdriver.
    -Laptop (Optional but very highly recommended) with an ethernet port or a USB to ethernet adapter.
    -SIM Card

Step 1: Unscrew the 4 screws attaching the gateway to the riser.


Step 2: Locate the SIM tray at the top of the gateway.


Step 3: Unscrew the cover over the SIM tray. Do not remove the screw all the way. The door should remain loosely attached.


Step 4: The SIM card should be positioned with the metal side facing you and the corner notch pointed down. Insert it into the SIM B Slot.


Step 5: Push the SIM into place until it clicks into place like a pen. If you ever need to remove the SIM card, push it in until it clicks and it will pop out of the SIM slot.


Step 6: Cover the SIM slots and use the small screw to slightly tighten the door into place.


​
Step 7: Screw the gateway back into place on the riser.


​

Did this answer your question?